จำนวนชิ้น | ส่วนลดต่อชิ้น | ราคาสุทธิต่อชิ้น |
{{(typeof focus_pdata.price_list[idx+1] == 'undefined')?('≥ '+price_row.min_quantity):((price_row.min_quantity < (focus_pdata.price_list[idx+1].min_quantity - 1))?(price_row.min_quantity+' - '+(focus_pdata.price_list[idx+1].min_quantity - 1)):price_row.min_quantity)}} | {{number_format(((focus_pdata.price_old === null)?focus_pdata.price:focus_pdata.price_old) - price_row.price,2)}} บาท | {{number_format(price_row.price,2)}} บาท |
คงเหลือ | ไม่จำกัด ชิ้น |
จำนวน (ชิ้น) |
- +
|
ซื้อเลย หยิบลงตะกร้า ซื้อเลย หยิบลงตะกร้า คุณมีสินค้าชิ้นนี้ในตะกร้า 0 ชิ้น
|
|
|
|
คุยกับร้านค้า | |
{{ size_chart_name }} |
|
หมวดหมู่ | ตู้แอมป์กีต้าร์ / Guitar Amps |
สภาพ | สินค้าใหม่ |
เพิ่มเติม | |
สภาพ | สินค้ามือสอง |
เกรด | |
สถานะสินค้า | |
ระยะเวลาจัดเตรียมสินค้า | |
เข้าร่วมโปรโมชั่น | |
ไฮไลท์ |
Udo Roesner Amps : Da Capo 75 -by Muzic Craft *ของแท้รับประกันศูนย์* ตู้แอมป์อคูสติกกีต้าร์ 8” Double cone, 6 Effect, 2 Channels
Features
Power: 75W nominal, 60W continuous, 180W instantaneous
Dynamic range: 92dB(A)
Driver : 8” double cone
Sensitivity : 93.1 dB SPL at 1m for 1W
Enclosure with bassreflex
2 channels with jack and XLR input, 3-band EQ and dedicated DI
2 line outputs: preamp level and -10dBV
Minijack stereo auxiliary input
External Send/Return effect loop
6 digital effects presets (2 reverbs, 2 delays, reverb+delay, chorus)
One delay effect controlled by footswitch
In the Box
Udo Roesner Amps : Da Capo 75
Carrying bag
Power Cord
|
ข้อมูล |
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
|
รายละเอียดสินค้า |
Udo Roesner Amps : Da Capo 75 -by Muzic Craft *ของแท้รับประกันศูนย์* ตู้แอมป์อคูสติกกีต้าร์ 8” Double cone, 6 Effect, 2 Channels
Features
Power: 75W nominal, 60W continuous, 180W instantaneous
Dynamic range: 92dB(A)
Driver : 8” double cone
Sensitivity : 93.1 dB SPL at 1m for 1W
Enclosure with bassreflex
2 channels with jack and XLR input, 3-band EQ and dedicated DI
2 line outputs: preamp level and -10dBV
Minijack stereo auxiliary input
External Send/Return effect loop
6 digital effects presets (2 reverbs, 2 delays, reverb+delay, chorus)
One delay effect controlled by footswitch
In the Box
Udo Roesner Amps : Da Capo 75
Carrying bag
Power Cord
Specs
INPUTS:
channel 1 and 2: switchable instrument or microphone input as combi-socket, XLR + jack ¼” (6.35 mm) and clip indicators, min. dynamic headroom: 8 dB
line mode: high impedance jack input for instruments (pick-ups directly), unbalanced and line-level sources
impedance: 2.2 Meg
sensitivity: 22 mV (–33 dBV) (high/low attenuator: –10 dB via jumper)
equivalent input noise: A-weighted: 1 uV (–120 dBV)
mic mode: XLR- , balanced and stereo jack socket, unbalanced
impedance: XLR, balanced: 1.2 kOhm
impedance: jack, unbalanced: 2.7 kOhm
sensitivity: 3.3 mV (–50 dBV)
voice filter: –10 dB at 270 Hz (referred to 10 kHz)
equivalent input noise: A-weighted: 0.8 uV (–122 dBV)
phantom power: (XLR only): 48 V, max. 10 mA, short-circuit protected
return: unbalanced jack input, ¼” (6.35 mm), pre-master
sensitivity: 320 mV (–10 dBV)
impedance: 19.7 kOhm (note: impedance changes to 4.7 kOhm when external effect is switched OFF)
aux in: TRS stereo input, 3.5mm
OUTPUTS:
phones: headphones, jack socket, stereo, L/R connected, ¼” (6.35 mm)
input Impedance: 470 Ohm (common for L and R)
(!) Please note: Use TRS (Stereo Jacks) only. Does not work with mono jacks, and When plugged in, internal speaker is muted!
send: jack socket, unbalanced, ¼” (6.35 mm), pre master, output voltage: 1.4 V (+3 dBV)
line out 1 and 2: jack socket, unbalanced, preamp out, ¼” (6.35 mm), post effect, post EQ and master
output voltage 2: 1.74 V (+3 dBV)
output voltage 1: 0.33 V (-4.6 dBV)
DI-out 1 and 2: balanced XLR socket, pre/post EQ (sitchable by jumper) post effect and master
1 = ground 2 = positive 3 = negative
differential output voltage: 140 mV (–17 dBV)
FOOTSWITCH
footswitch: TRS jack socket ¼” (6.35 mm) to connect latching dual foot switch.
tip = built-in effect on/off, ring = parameter adjust or additional effect on/off , sleeve = common (ground)
(!) Please note: Effect is OFF when the footswitch is ON.
EQ - Tone Controls
channel 1:
tone: –3 dB at 700 Hz, +7 dB at 8 kHz
bass: 8 dB at 100 Hz (shelf type)
middle: 6 dB at 800 Hz
treble: 8 dB at 10 kHz (shelf type)
channel 2:
hpf filter: 40Hz to 350 Hz,
bass: 8 dB at 100 Hz (shelf type)
middle: 6 dB at 800 Hz
treble: 8 dB at 10 kHz (shelf type)
EFFECTS
effect presets: 1: reverb long, 2: reverb short, 3: chorus, 4: custom delay, 5: my delay, 6: tap n’ delay, external effect: parallel effect loop (see also send and return)
efx pan: blends both internal and external effects between channels 1 and 2,
POWER SECTION
power amp: 75 W / 4 ohm, DMOS, monolithic I.C. dynamic range, A-weighted: 92 dB
analog signal processing: dedicated equalizer, subsonic filter, adaptive peak limiter
limiter threshold: 60 W
speaker system: 8” (200 mm) twin cone full-range speaker, bass reflex enclosure
mains power: mains voltage (depending on model): 100, 120, 230, or 240 V AC, 50–60 Hz
power consumption: max. 200 W
mains fuse: 5 x 20 mm T 1A L /250 V for 230 and 240 V 5 x 20 mm T 2A L /250 V for 100 and 120 V
GENERAL
cabinet: 12 mm (0.47”) plywood
finish: polyester black spatter finish
dim: 26.5 x 32.5 x 24.5 cm
weight: 7.5 kg ![]() ![]() ![]() ![]() ![]() ![]() |
เงื่อนไขอื่นๆ |
|
Tags |